Path: csiph.com!weretis.net!feeder6.news.weretis.net!feeder.erje.net!2.us.feeder.erje.net!nntp.club.cc.cmu.edu!micro-heart-of-gold.mit.edu!bloom-beacon.mit.edu!bloom-beacon.mit.edu!panix!wb8foz From: David Lesher Newsgroups: sci.electronics.design,sci.electronics.components Subject: Re: I2C relay boards. Date: Sat, 28 Oct 2017 18:23:38 +0000 (UTC) Organization: NRK Clinic for habitual NetNews Abusers - Beltway Annex Lines: 22 Message-ID: References: NNTP-Posting-Host: panix5.panix.com X-Trace: reader2.panix.com 1509215018 4844 166.84.1.5 (28 Oct 2017 18:23:38 GMT) X-Complaints-To: abuse@panix.com NNTP-Posting-Date: Sat, 28 Oct 2017 18:23:38 +0000 (UTC) User-Agent: nn/6.7.3 Xref: csiph.com sci.electronics.design:483359 sci.electronics.components:6251 Michael A Terrell writes: >> I need some 10 position one-row headers but will likely use >> two-row 20's and ignore the other. I do plan to plug them end >> to end but will need to hold them. Thinking a slotted /______\ >> piece of soft plastic that in turn is mounted to the DIN rail. >Yes, ribbon cable. Peel off as many conductors as you need. The color >code repeats every ten conductors. >T1-3X-40pcs-20cm-Male-To-Male-Female-Dupont-Wire-Jumper-Cable-Arduino-Breadboard >https://www.ebay.com/itm/231708399395 I'd rather use an IDC connector that matches the headers; less chance something gets loose/ is misconnected. -- A host is a host from coast to coast.................wb8foz@nrk.com & no one will talk to a host that's close.......................... Unless the host (that isn't close).........................pob 1433 is busy, hung or dead....................................20915-1433