Path: csiph.com!eternal-september.org!feeder3.eternal-september.org!news.eternal-september.org!.POSTED!not-for-mail From: a3@a3.nl.invalid (Adri Verhoef) Newsgroups: nl.comp.os.linux.techniek Subject: Re: Data redden Date: Mon, 15 Jul 2024 00:00:20 GMT Organization: A3, The Netherlands Lines: 35 Message-ID: References: MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 8bit Injection-Date: Mon, 15 Jul 2024 02:39:03 +0200 (CEST) Injection-Info: dont-email.me; posting-host="bcffbba3a024fd76442080997244b7b1"; logging-data="408749"; mail-complaints-to="abuse@eternal-september.org"; posting-account="U2FsdGVkX194fqQ6g6+gTOROUrCDIGgzpwnCEujUzIg=" Cancel-Lock: sha1:XFszCAmeo7EabivqqgXbRjTqo/0= X-Editor: Vim X-Newsreader: trn 4.0-test77 (Sep 1, 2010) Xref: csiph.com nl.comp.os.linux.techniek:9695 Op moederschip aarde schreef iemand die zich identificeerde als Paul van der Vlis : > >Ik heb hem nu aan een vrij nieuwe laptop gehangen met een forse USB-C >voeding en natuurlijk een accu. Op zich gebeurd zo ongeveer hetzelfde, >alleen krijg ik nu error -62. > >paul@laptopp:~$ grep '62' /usr/include/asm-generic/errno.h >#define ETIME 62 /* Timer expired */ >paul@laptopp:~$ > >Dus ook een timeout... > >Fout 110 is officieel "Connextion timeout". Tsja, of je nog iets aan mijn volgende zoekresultaat hebt, dat kan ik niet beoordelen, Paul, maar je zou het volgende kunnen proberen: via https://www.linuxquestions.org/questions/linux-hardware-18/i-get-a-device-descriptor-read-64-error-62-message-when-plugging-my-usb-key-4175733997/ "It's a hardware problem. Here is a little trick that has worked for several people. Mind you, it's a very old thread." vond ik: https://paulphilippov.com/articles/how-to-fix-device-not-accepting-address-error (tja, zoals benoemd, het is een oud artikel, uit 2010): "most probably it’s a result of hardware failure rather than a driver or kernel bug. USB has an over-current protection, which gets triggered when power consumption from the port is too high. Unplug all USB devices from PC, turn power off, and wait a minute or two. Plug everything back and boot into Linux. I spent the whole morning, until found out why. I hope that this message will save someone a few hours, and nerves. PS: Actual errors may vary. You may see different port and/or error code. Ex.: usb 3-1: device descriptor read/64, error -62" Ik zou zeggen, blaat het niet, dan schaapt het niet. Adri