Path: csiph.com!usenet.pasdenom.info!weretis.net!feeder4.news.weretis.net!nuzba.szn.dk!pnx.dk!fu-berlin.de!uni-berlin.de!news.dfncis.de!not-for-mail
From: Alexander Hofmann <alexander.hofmann@physik.uni-augsburg.de>
Newsgroups: comp.sys.ibm.pc.hardware.comm
Subject: Everex RAM 8000 (EV-178) - Configuration Utility ?
Date: Sat, 03 Nov 2012 19:43:33 +0100
Lines: 26
Message-ID: <afl6usFaj3tU1@mid.dfncis.de>
Mime-Version: 1.0
Content-Type: text/plain; charset=ISO-8859-15
Content-Transfer-Encoding: 7bit
X-Trace: news.dfncis.de /AmuBsfByzF5BB5za5b81Abyms4dkUj9utFathNfJ5M43i/Vp3TbZA5DCToXAk
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:16.0) Gecko/20121011 Thunderbird/16.0.1
Xref: csiph.com comp.sys.ibm.pc.hardware.comm:4

Hi there.

I hope this is the right group - if not, please tell me.

I've just recently got hands on an Everex RAM 8000 board (EV-178).

I'm planning to use it in a Commodore PC40 system (AT-Compatible with an
Intel 286).

The only document I've found describing the board is located at
www.student.nada.kth.se/~d94-tan/pckort/ever8000.txt

I've managed to get the EMM.SYS driver mentioned in the above document,
but it won't find the board and hence refuses to load.

I could not, however, find the "EV178.EXE" configuration utility; as the
board's almost completely configured via an EEPROM and the utility, I
cannot even tell whether it's set to EMS or XMS, 8 or 16bit mode etc.

Does someone still have the config-disk and/or manual lying around?

Any help would be highly appreciated!

Thanks in Advance

Alexander Hofmann