Groups | Search | Server Info | Login | Register

Groups > comp.sys.amiga.hardware > #73

Re: A500 Rev. 5 - problems upgrading to WB3.1 ROM

Show all headers | View raw

On Wednesday, October 5, 1994 at 5:50:51 AM UTC-4, Stefan Schmidt wrote:
> Byron Montgomerie (byron@cs.mun.ca) wrote:
> : On Wed, 28 Sep 94 08:38:22 EDT, Len Lekx did proclaim:
> : # In article <369pbu$1q2@pheidippides.axion.bt.co.uk> rharnwel@axion.bt.co.uk (Richard Harnwell) writes:
> 
> > A500 with a revision 5 motherboard (not forgeting to connect pin 1 to pin 31).
> > The result of this was a 'dead' amiga, so the original 1.3 chip was replaced
> > & all was well again.
> 
> Hello,
> 
> You have to connect pin 1 and pin 31 at the socket (not the ROM!). Then you
> must leave pin 31 out of the socket and connect pin 31 and pin 21 on the
> ROM. This works fine at my A 500 Rev. 5 with Kickstart 3.1 (40.63).
> 
> Stefan
> 
> ----------------------------------------------------------------------------
> |                                                                          |
> | Stefan Schmidt   |           e-MAIL ssch0999@rz.uni-hildesheim.de        |
> |                                                                          |
> ----------------------------------------------------------------------------

Greetings from 14 years in the future.  You saved my bacon.  Thanks.

Back to comp.sys.amiga.hardware | Previous | Next | Find similar

Thread

Re: A500 Rev. 5 - problems upgrading to WB3.1 ROM chuck.rabb@gmail.com - 2018-11-03 19:44 -0700

csiph-web