Path: csiph.com!v102.xanadu-bbs.net!xanadu-bbs.net!news.glorb.com!dotsrc.org!filter.dotsrc.org!news.dotsrc.org!not-for-mail From: Rodolfo Medina Newsgroups: comp.protocols.ppp Subject: `Terminating on signal 2' Date: Mon, 04 May 2015 11:35:29 +0000 Message-ID: <87383ch8xq.fsf@gmail.com> User-Agent: Gnus/5.13 (Gnus v5.13) Emacs/24.4 (gnu/linux) Cancel-Lock: sha1:PLuZfhKtYkDCgLijTat24Mxbj/Q= MIME-Version: 1.0 Content-Type: text/plain Lines: 132 Organization: SunSITE.dk - Supporting Open source NNTP-Posting-Host: 151.46.169.82 X-Trace: news.sunsite.dk DXC=U:\KHFWL920kVm3Q1RnDK5YSB=nbEKnk;=6@CdJ2Vjd;DJ@`_]lSHg085LmgVBF4d2LcLQd[U<8384?1BheR[eH?UbGZP0gbRO;fbnJ`iK76Z2 X-Complaints-To: staff@sunsite.dk Xref: csiph.com comp.protocols.ppp:98 Hi all. During ppp connection, very often it happens that it sticks, i.e. it's still open but it's not possibile navigate, browser can't open pages. Then I do `C-c' from command line and the connection stops showing the above message. Please help, whoever can, about diagnostic and - possibily - solution of the problem. Thanks, Rodolfo $ pon motorola abort on (BUSY) abort on (NO CARRIER) abort on (VOICE) abort on (NO DIALTONE) abort on (NO DIAL TONE) abort on (NO ANSWER) abort on (DELAYED) send (ATZ^M) expect (OK) ATZ^M^M OK -- got it send (AT+CGDCONT=1,"IP","internet.wind"^M) expect (OK) ^M AT+CGDCONT=1,"IP","internet.wind"^M^M OK -- got it send (AT+CGQREQ=1,2,4,3,6,31^M) expect (OK) ^M AT+CGQREQ=1,2,4,3,6,31^M^M OK -- got it send (AT+CGQMIN=1,2,4,3,6,31^M) expect (OK) ^M AT+CGQMIN=1,2,4,3,6,31^M^M OK -- got it send (AT+CGATT=1^M) expect (OK) ^M AT+CGATT=1^M^M OK -- got it send (ATD*99#^M) expect (CONNECT) ^M ATD*99#^M^M CONNECT -- got it send (^M) Script /usr/sbin/chat -v -s -f /etc/chatscripts/motorola finished (pid 2746), status = 0x0 Serial connection established. using channel 4 Using interface ppp0 Connect: ppp0 <--> /dev/ttyUSB0 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfReq id=0x8 ] No auth is possible sent [LCP ConfRej id=0x8 ] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP ConfReq id=0x9 ] sent [LCP ConfAck id=0x9 ] sent [LCP EchoReq id=0x0 magic=0xd75c2a2d] sent [CCP ConfReq id=0x1 ] sent [IPCP ConfReq id=0x1 ] rcvd [LCP DiscReq id=0xa magic=0x1c08649] rcvd [LCP ProtRej id=0xb 80 fd 01 01 00 0f 1a 04 78 00 18 04 78 00 15 03 2f] Protocol-Reject for 'Compression Control Protocol' (0x80fd) received rcvd [IPCP ConfNak id=0x1 ] sent [IPCP ConfReq id=0x2 ] rcvd [IPCP ConfNak id=0x2 ] sent [IPCP ConfReq id=0x3 ] rcvd [IPCP ConfReq id=0x4] sent [IPCP ConfNak id=0x4 ] rcvd [IPCP ConfRej id=0x3 ] sent [IPCP ConfReq id=0x4 ] rcvd [IPCP ConfNak id=0x4 ] sent [IPCP ConfReq id=0x5 ] rcvd [IPCP ConfAck id=0x5 ] rcvd [IPCP ConfReq id=0x5] sent [IPCP ConfAck id=0x5] Could not determine remote IP address: defaulting to 10.64.64.64 local IP address 10.57.244.99 remote IP address 10.64.64.64 primary DNS address 193.70.152.25 secondary DNS address 212.52.97.25 Script /etc/ppp/ip-up started (pid 2790) Script /etc/ppp/ip-up finished (pid 2790), status = 0x0 ^CTerminating on signal 2 Connect time 13.4 minutes. Sent 2563537 bytes, received 16419927 bytes. Script /etc/ppp/ip-down started (pid 2972) sent [LCP TermReq id=0x2 "User request"] Script /etc/ppp/ip-down finished (pid 2972), status = 0x0 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 sent [LCP TermReq id=0x3 "User request"] ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 ^CTerminating on signal 2 Connection terminated. ^Cioctl(TIOCSETD, N_TTY): Interrupted system call (line 576) ^C^Ctcsetattr: Interrupted system call (line 1054) Terminating on signal 2 Modem hangup