Groups | Search | Server Info | Login | Register

Groups > comp.os.os2.ecomstation > #1157

Re: eCS won't boot : Driver not licensed?? (Used to work fine)

Show all headers | View raw

Ok, still no luck.
I'm not sure which driver thinks it's borked, it scrolls through all of them and then clears the screen.
I see the Integrated ACPI Support Driver for eComstation v 3.18 has loaded
and then it is
Power Management for eComstation v1.31
and then it says "This driver is licensed for use only in conjunction with eComstation..."

It might be the JFS driver if I recall what a good boot looks like, but then if that's the case, how did it get this far?

I tried booting with my good disk and this "bad" one connected as external but it only sees my data partition (also JFS). I tried booting with eCS 2.1 CD#1 but same problem, the C:\ drive where everything boots from doesn't seem to be visible.

Any other tips?
Can I re-install eCS but no format? I have DFSee but not sure what could be broken...this disk is good, all the other OS boot fine. eCS starts the boot at least and the last I recall this computer had always been booting eCS just fine (it was my primary OS until I switched laptops).



On Thursday, January 17, 2019 at 9:01:07 PM UTC-8, atomi...@gmail.com wrote:
> d
> 
> 
> On Thursday, January 17, 2019 at 7:16:54 AM UTC-8, Pete wrote:
> > Hi
> > 
> > a****com wrote:
> > > My machine is Thinkpad T61p, it had been my daily driver and I used eCS as my primary OS. It actually quad-boots eCS (JFS), Win7-32bit, openSUSE and PCBSD.
> > >
> > > It went idle for a while when I upgraded to a new laptop but recently had to boot it up to grab some data. However, when it tries to boot eCS, it stops saying that the driver (which driver?) is only licensed for eComstation and won't work on OS/2. This _is_ eComstation and I do have a license.
> > >
> > > It got past ACPI? Says 1 processor active and then something else and then stops.
> > 
> > 
> > This is a but of a guess but the only way I know of that eCS can be 
> > distinguished from OS/2 would be for an eCS driver/software to check for 
> > the file [BootDrive]:\ecs\ECS_INST.FLG
> > 
> > If the above file is missing - or maybe corrupt - I guess an ecs driver 
> > could decide that it is not installed on ecs.
> > 
> > I think the 1st thing I would do is a chkdsk just to make sure there are 
> > no filesystem problems then double check the existence of the 
> > [BootDrive]:\ecs\ECS_INST.FLG file and that the contents of the file are 
> > unmangled text.
> > 
> 
> Hmm...that sounds like it might be the easier option. I will try to boot from my even older T40p with that as an external drive. I'm a bit hesitant to boot from the cloned drive because I think I've seen funny things happen before doing that since I've mounted a drive with exactly the same objects duplicated...

Back to comp.os.os2.ecomstation | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

eCS won't boot : Driver not licensed?? (Used to work fine) atomic.frog@gmail.com - 2019-01-16 20:10 -0800
  Re: eCS won't boot : Driver not licensed?? (Used to work fine) rklein46@roadrunner.com - 2019-01-16 21:45 -0800
  Re: eCS won't boot : Driver not licensed?? (Used to work fine) Pete <losepete@losepete.plus.com> - 2019-01-17 15:16 +0000
    Re: eCS won't boot : Driver not licensed?? (Used to work fine) atomic.frog@gmail.com - 2019-01-17 21:01 -0800
      Re: eCS won't boot : Driver not licensed?? (Used to work fine) atomic.frog@gmail.com - 2019-02-02 18:43 -0800
        Re: eCS won't boot : Driver not licensed?? (Used to work fine) Dave Yeo <dave.r.yeo@gmail.com> - 2019-02-02 20:37 -0800
        Re: eCS won't boot : Driver not licensed?? (Used to work fine) "Barbara" <bca.1824@knot.gmail.com> - 2019-02-03 21:31 +0000
    Re: eCS won't boot : Driver not licensed?? (Used to work fine) Andreas Schnellbacher <aschn@despammed.com> - 2019-03-09 12:34 +0100
      Re: eCS won't boot : Driver not licensed?? (Used to work fine) atomic.frog@gmail.com - 2019-03-10 20:02 -0700

csiph-web