Path: csiph.com!fu-berlin.de!uni-berlin.de!individual.net!not-for-mail From: vallor Newsgroups: comp.os.linux.advocacy,comp.os.linux.misc Subject: Re: Swapping like gangbusters! Date: 7 Nov 2024 15:06:28 GMT Lines: 38 Message-ID: References: Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Trace: individual.net rfEu4u7l8kH/PhgbKHBZfQiOwOwFRIYK99+wZANJDlFRLIMVCQ Cancel-Lock: sha1:HFWw24qSK5b7S50egyxbi3hDvKU= sha256:qKZha4Jfm0F7sl6umrVmW4cWZ7IDFE2r0j5BPDNYXsQ= X-Face: +McU)#<-H?9lTb(Th!zR`EpVrp<0)1p5CmPu.kOscy8LRp_\u`:tW;dxPo./(fCl CaKku`)]}.V/"6rISCIDP` User-Agent: Pan/0.161 (Hmm2; 700d2d95; Linux-6.11.6) Xref: csiph.com comp.os.linux.advocacy:676530 comp.os.linux.misc:60750 On Thu, 7 Nov 2024 09:28:10 -0500, Chris Ahlstrom wrote in : > So occasionally kswapd will start going whole hog. In combination with > Chromium running and a make -j N job running, the system would slow > wayyyyyy down, > with kswapd trying to find a swap partition that did not exist (my > bad!). > > There's a daemon called swapspace in the Debian repository. But I > decided to try making a swapfile first. Here are the steps ("#" > indicates a root prompt or the use of sudo): > > # fallocate -l 4G /swapfile [or see the "dd" command below] > # chmod 600 /swapfile # mkswap /swapfile # swapon /swapfile # vi > /etc/fstab, and add: > > /swapfile swap swap defaults 0 0 [to make the change permanent at > boot] > > # swapon --show [to verify] > > Alternate command: > > # dd if=/dev/zero of=/swapfile bs=1024 count=4194304 > > Imma go with this for awhile and see how it goes. If you try it, don't > blame me if it fscks up your system :-D Thanks for the heads-up about fallocate(1). If creating a large file for (say) a virtual host, you might want to consider truncate(1), which builds a sparse file. -- -v System76 Thelio Mega v1.1 x86_64 NVIDIA RTX 3090 Ti OS: Linux 6.11.6 Release: Mint 21.3 Mem: 258G "If you don't like the news, go out and make some of your own."