Groups | Search | Server Info | Keyboard shortcuts | Login | Register
Groups > comp.os.linux.hardware > #3570
| From | ant@zimage.comANT (Ant) |
|---|---|
| Subject | Re: Dying HDD? |
| Newsgroups | comp.sys.ibm.pc.hardware.storage, alt.comp.periphs.hdd, comp.os.linux.hardware |
| References | <ju-dnaruxfKtkSv_nZ2dnUU7-fHNnZ2d@earthlink.com> |
| Message-ID | <tdGdnThxGqeGiSv_nZ2dnUU7-L-dnZ2d@earthlink.com> (permalink) |
| Date | 2022-06-24 14:44 -0500 |
Cross-posted to 3 groups.
Short and long tests failed quickly. :(
In comp.os.linux.hardware Ant <ant@zimage.comant> wrote:
> 11:16 -!- Irssi: INBOX ::: root@mybox: SMART error
> (CurrentPendingSector) detected on host:
> The following warning/error was logged by the smartd daemon:
> Device: /dev/sdb [SAT], 5 Currently unreadable (pending) sectors
> I quickly started a long test:
> $ sudo /usr/sbin/smartctl --test=long /dev/sdb
> smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
> === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
> Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
> Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
> Testing has begun.
> Please wait 256 minutes for test to complete.
> Test will complete after Fri Jun 24 16:12:36 2022 PDT
> Use smartctl -X to abort test.
> Minutes later, I checked to see what the detailed preliminary report had to say:
> $ sudo /usr/sbin/smartctl -a /dev/sdb
> smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-15-amd64] (local build)
> Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
> === START OF INFORMATION SECTION ===
> Model Family: Western Digital Purple
> Device Model: WDC WD20PURX-64P6ZY0
> Serial Number: WD-WCC[deleted]
> LU WWN Device Id: 5 0014ee 20d7cb2d0
> Firmware Version: 80.00A80
> User Capacity: 2,000,398,934,016 bytes [2.00 TB]
> Sector Sizes: 512 bytes logical, 4096 bytes physical
> Rotation Rate: 5400 rpm
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: ACS-2 (minor revision not indicated)
> SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
> Local Time is: Fri Jun 24 11:59:04 2022 PDT
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
> General SMART Values:
> Offline data collection status: (0x84) Offline data collection activity
> was suspended by an interrupting command from host.
> Auto Offline Data Collection: Enabled.
> Self-test execution status: ( 121) The previous self-test completed having
> the read element of the test failed.
> Total time to complete Offline
> data collection: (25320) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 256) minutes.
> Conveyance self-test routine
> recommended polling time: ( 5) minutes.
> SCT capabilities: (0x703d) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
> SMART Attributes Data Structure revision number: 16
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 41
> 3 Spin_Up_Time 0x0027 177 174 021 Pre-fail Always - 4108
> 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 728
> 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
> 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
> 9 Power_On_Hours 0x0032 038 038 000 Old_age Always - 45430
> 10 Spin_Retry_Count 0x0032 100 100 000 Old_age Always - 0
> 11 Calibration_Retry_Count 0x0032 100 100 000 Old_age Always - 0
> 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 708
> 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 586
> 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 699
> 194 Temperature_Celsius 0x0022 108 107 000 Old_age Always - 39
> 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
> 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 5
> 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
> 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0
> 200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 1
> SMART Error Log Version: 1
> No Errors Logged
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
> # 1 Extended offline Completed: read failure 90% 45430 44175392
> # 2 Extended offline Completed without error 00% 35939 -
> # 3 Short offline Completed without error 00% 35902 -
> # 4 Conveyance offline Completed without error 00% 32943 -
> # 5 Short offline Completed without error 00% 32943 -
> # 6 Extended offline Completed without error 00% 19216 -
> # 7 Conveyance offline Completed without error 00% 19200 -
> # 8 Short offline Completed without error 00% 19200 -
> # 9 Extended offline Completed without error 00% 14920 -
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
> Uh, is that bad? :(
--
Dang summer and too many videos to watch and keep up.
Note: A fixed width font (Courier, Monospace, etc.) is required to see this signature correctly.
/\___/\ Ant(Dude) @ http://aqfl.net & http://antfarm.home.dhs.org.
/ /\ /\ \ Please nuke ANT if replying by e-mail.
| |o o| |
\ _ /
( )
Back to comp.os.linux.hardware | Previous | Next — Previous in thread | Next in thread | Find similar
Dying HDD? ant@zimage.comANT (Ant) - 2022-06-24 14:10 -0500
Re: Dying HDD? ant@zimage.comANT (Ant) - 2022-06-24 14:44 -0500
Re: Dying HDD? Bobbie Sellers <bliss@mouse-potato.com> - 2022-06-24 13:40 -0700
Re: Dying HDD? "Vincent Coen" <VBCoen@gmail.com> - 2022-06-25 01:29 +0100
Re: Dying HDD? Marco Moock <mo01@posteo.de> - 2022-06-26 10:19 +0200
Re: Dying HDD? Christopher Kelley <debianz@sdf.org> - 2022-07-31 22:43 -0600
csiph-web