Groups | Search | Server Info | Login | Register
| From | Gary A. Edelstein <edelsgNO@SPAMyahoo.com.invalid> |
|---|---|
| Newsgroups | comp.dcom.xdsl |
| Subject | Re: static on ATT uverse dsl landline |
| Date | 2012-09-10 14:03 -0500 |
| Message-ID | <47ds4854f0pgbtn2853ph1qffcfht2c4ef@4ax.com> (permalink) |
| References | <1e637683-ae3c-44f9-9b79-7c7ef131f649@googlegroups.com> |
| Organization | Unlimited download news at news.astraweb.com |
On Fri, 7 Sep 2012 19:59:45 -0700 (PDT), itchyneebanshee@hotmail.com wrote: > >I recently got ATT uverse dsl and kept my landline, also with >ATT. It worked fine and then static began to appear on the phone. >I have the filters installed correctly and have swapped filters >to check those. I have also tested out another phone, with >no effect on the static. > >Sometimes when I pick up the phone, there is a loud buzz on it, >but if I hang up and then call my phone with a cell phone >and answer it, the buzz disappears, but the static is there. > >I'm going to either: > >1. drop the landline and use a cell >2. test out vonage and drop the landline >3. change to uverse fiber optic phone > >In the meantime, any sugggestions to clear up the static? >The internet modem works fine. >Also, before I had uverse, I had ATT 780kpbs low level dsl >and no static on the landline. Only after I upgraded with >the new uverse router did the static begin, and it developed >after a week or so. > While they may be on the same copper pair, Uverse internet (and TV) and analog voice services are managed and billed separately by ATT. I suggest you call the service number on your analog phone bill and start a ticket for your problem. Make sure ATT properly tests the line and ensure they can test to see if it's your equipment or wiring or in their system. Your interface box should allow them to isolate your inside wiring and equipment from their line. If you pay for inside wiring service, then they can fix that if that's the source. Based on your post, it sounds like it's their issue, not yours. You could unplug all handsets and plug them in one at a time to see if any is the source of the noise. They may have put your analog voice phone on a different copper pair when Uverse was installed and is the source of the noise. Gary E
Back to comp.dcom.xdsl | Previous | Next — Previous in thread | Next in thread | Find similar
static on ATT uverse dsl landline itchyneebanshee@hotmail.com - 2012-09-07 19:59 -0700 Re: static on ATT uverse dsl landline "Adam H. Kerman" <ahk@chinet.com> - 2012-09-08 10:32 +0000 Re: static on ATT uverse dsl landline Gary A. Edelstein <edelsgNO@SPAMyahoo.com.invalid> - 2012-09-10 14:03 -0500 Re: static on ATT uverse dsl landline Bert <bert@iphouse.com> - 2012-09-10 19:09 +0000
csiph-web