Groups | Search | Server Info | Login | Register

Groups > comp.dcom.telecom.tech > #316

According to the Leviton "Requirements Beyond Jacks and Cable:An Installation Guide 3RD Revision" it is regarding 66 Blocks and wiring 25 pair wiring to them

Show all headers | View raw

Hello!
On Pages C-2 and C-3 they describe how to make use of an RJ21X connector and the 25 pair bundle and how to punch the bundle down to a 66 Block termination array.

The illustration on C-3 shows one bundle punched down on the left, and the same on the right. There are empty terminals in between them.

Now the question, what happens when the installer needs to make connections between the right and left handed bundles?

Yes I was asked this by a customer of mine several days ago. I described what's seen inside the Leviton book, since (I hope) that particular book is  a part of most system installer's libraries.

The customer was watching me install a system that would make use of one of the supposedly dead pairs on that bundle.
-----
Gregg gregg dot drwho8 atsign gmail dot com
"This signature isn't here."
 

Back to comp.dcom.telecom.tech | Previous | Next — Next in thread | Find similar

Thread

According to the Leviton "Requirements Beyond Jacks and Cable:An Installation Guide 3RD Revision" it is regarding 66 Blocks and wiring 25 pair wiring to them gregg dot drwho8 atsign gmail dot com <gregg.drwho8@gmail.com> - 2015-08-07 19:24 -0700
  Re: According to the Leviton "Requirements Beyond Jacks and Cable:An Installation Guide 3RD Revision" it is regarding 66 Blocks and wiring 25 pair wiring to them Doug McIntyre <merlyn@dork.geeks.org> - 2015-08-10 02:07 -0500
  Re: According to the Leviton "Requirements Beyond Jacks and Cable:An Installation Guide 3RD Revision" it is regarding 66 Blocks and wiring 25 pair wiring to them Retired <Retired@home.com> - 2015-08-10 11:38 -0400

csiph-web