Groups > alt.comp.periphs.keyboard > #23

Re: Unicomp Model-M a disaster --RESOLVED--

From	Andy Burns <usenet@andyburns.uk>
Newsgroups	alt.comp.hardware.pc-homebuilt, alt.windows7.general, alt.comp.os.windows-10, alt.comp.periphs.keyboard
Subject	Re: Unicomp Model-M a disaster --RESOLVED--
Date	2018-05-25 03:29 +0100
Message-ID	<fmpaouF4lqlU1@mid.individual.net> (permalink)
References	(3 earlier) <p3jtsq$f38$1@dont-email.me> <p3mrde$u1a$1@dont-email.me> <pcb8m2$rn0$1@dont-email.me> <pcgqel$jdd$1@dont-email.me> <pe2nqa$sen$1@dont-email.me>

Cross-posted to 4 groups.

Show all headers | View raw

B00ze wrote:

> I had used 100% alcohol to clean the traces on the
> transparent plastic "membrane" earlier, trying to get better contact to
> the controller board. This weekend, flipping the membrane over, I
> discovered that I had totally removed some of the traces when I used the
> alcohol; so some of the traces were "cut" and will never again make
> contact with the controller board. So this keyboard is toast;

Could you use some of the silver(?) conductive paint to re-draw the traces?

Back to alt.comp.periphs.keyboard | Previous | Next — Previous in thread | Next in thread | Find similar

Thread

Unicomp Model-M a disaster B00ze <B00ze64@hotmail.com> - 2018-01-12 23:05 -0500
  Re: Unicomp Model-M a disaster Andy Burns <usenet@andyburns.uk> - 2018-01-13 09:51 +0000
  Re: Unicomp Model-M a disaster Roger Blake <rogblake@iname.invalid> - 2018-01-13 14:31 +0000
  Re: Unicomp Model-M a disaster "Mr. Man-wai Chang" <toylet.toylet@gmail.com> - 2018-01-13 22:44 +0800
  Re: Unicomp Model-M a disaster T <T@invalid.invalid> - 2018-01-14 15:39 -0800
  Re: Unicomp Model-M a disaster Jason <jason_warren@ieee.org> - 2018-01-14 22:23 -0500
    Re: Unicomp Model-M a disaster Wolf K <wolfmac@sympatico.ca> - 2018-01-15 08:58 -0500
      Re: Unicomp Model-M a disaster (Reply to everyone) B00ze <B00ze64@hotmail.com> - 2018-01-16 11:57 -0500
        Re: Unicomp Model-M a disaster (Reply to everyone) B00ze <B00ze64@hotmail.com> - 2018-01-17 01:45 -0500
          Re: Unicomp Model-M a disaster (Reply to everyone) B00ze <B00ze64@hotmail.com> - 2018-05-01 22:44 -0400
            Re: Unicomp Model-M a disaster (New foam pad in the mail) B00ze <B00ze64@hotmail.com> - 2018-05-04 01:18 -0400
              Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-22 23:39 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- Paul <nospam@needed.invalid> - 2018-05-22 23:53 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-23 00:16 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- GlowingBlueMist <GlowingBlueMist@blackhole.io> - 2018-05-25 00:46 -0500
                Re: Unicomp Model-M a disaster --RESOLVED-- GlowingBlueMist <GlowingBlueMist@blackhole.io> - 2018-05-25 00:52 -0500
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-26 01:49 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- Andy Burns <usenet@andyburns.uk> - 2018-05-25 03:29 +0100
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-24 23:50 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- Paul <nospam@needed.invalid> - 2018-05-25 01:19 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-26 01:32 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-26 01:48 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- Paul <nospam@needed.invalid> - 2018-05-26 02:24 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- B00ze <B00ze64@hotmail.com> - 2018-05-30 01:17 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- "J. P. Gilliver (John)" <G6JPG-255@255soft.uk> - 2018-05-25 06:27 +0100
                Re: Unicomp Model-M a disaster --RESOLVED-- Andy Burns <usenet@andyburns.uk> - 2018-05-25 07:03 +0100
                Re: Unicomp Model-M a disaster --RESOLVED-- "Mr. Man-wai Chang" <toylet.toylet@gmail.com> - 2018-05-25 18:07 -0700
                Re: Unicomp Model-M a disaster --RESOLVED-- Paul <nospam@needed.invalid> - 2018-05-25 06:27 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- "Mr. Man-wai Chang" <toylet.toylet@gmail.com> - 2018-05-25 18:36 -0700
                Re: Unicomp Model-M a disaster --RESOLVED-- Paul <nospam@needed.invalid> - 2018-05-25 07:07 -0400
                Re: Unicomp Model-M a disaster --RESOLVED-- "Mr. Man-wai Chang" <toylet.toylet@gmail.com> - 2018-05-25 23:10 -0700

csiph-web